Flow in a 3D diffuser

Confined flows

Underlying Flow Regime 4-16

References

Abe, K. and Ohtsuka, T. (2010): An investigation of LES and Hybrid LES/RANS models for predicting 3-D diffuser flow. Int. J. Heat and Fluid Flow , Vol. 31(5), pp. 833–844
Bradshaw, P. and Wong, F.Y.F.: The reattachment and relaxation of a turbulent shear layer. J. Fluid Mech., Vol. 52(1), pp. 113–135, 1972
Breuer, M. (2010): A hybrid LES-URANS approach for non-equilibrium turbulent flows such as 3-D diffuser flows. 8th Int. ERCOFTAC Symp. on Engineering Turbulence Modelling and Measurements (ETMM8), Marseille, France, June 9–11
Buice, C.U. and Eaton, J.K. (1996): Experimental investigation of flow through an asymmetric plane diffuser. CTR Annual Research Briefs, pp. 243–248
Buice, C.U. and Eaton, J.K. (2000): Experimental investigation of flow through an asymmetric plane diffuser. ASME J. Fluids Eng., Vol. 122, pp. 433–435
Cherry, E. M., Iaccarino, G., Elkins, C.J. and Eaton, J.K. (2006): Separated flow in a three-dimensional diffuser: preliminary validation. Center for Turbulence Research, Stanford University, Annual Research Brief 2006, pp. 31–40
Cherry, E.M., Elkins, C.J. and Eaton, J.K. (2008): Geometric sensitivity of three-dimensional separated flows. Int. J. of Heat and Fluid Flow, Vol. 29(3), pp. 803–811
Cherry, E.M., Elkins, C.J. and Eaton, J.K. (2009): Pressure measurements in a three-dimensional separated diffuser. Int. J. of Heat and Fluid Flow, Vol. 30(1), pp. 1–2
Fröhlich, J. and von Terzi, D. (2008): Hybrid LES/RANS methods for the simulation of turbulent flows. Prog. Aerosp. Sci., Vol. 44, pp. 349–377
Grundmann, S., Sayles E. L. and Eaton J. K. (2011): Sensitivity of an asymmetric 3D diffuser to plasma-actuator induced inlet condition perturbations. Experiments in Fluids, Vol. 50(1), pp. 217–231
Grundmann, S., Sayles E. L. and Eaton J. K. (2012): Sensitivity of an asymmetric 3D diffuser to vortex-generator induced inlet condition perturbations. Experiments in Fluids, Vol. 52(1), pp. 11–21
Gullman-Strand, J., Törnblom, O., Lindgren, B., Amberg, G. and Johansson, A.V. (2004): Numerical and experimental study of separated flow in a plane asymmetric diffuser. Int. J. Heat Fluid Flow, Vol. 25(3), pp. 451–460
Hellsten, A. and Rautaheimo, P. (editors), (1999): Proceedings of the 8th ERCOFTAC/IAHR/COST Workshop on Refined Turbulence Modelling, 17–18 June. Helsinki University of Technology
Jakirlić, S., Kadavelil, G., Kornhaas, M., Schäfer, M., Sternel, D.C. and Tropea, C. (2010a): Numerical and Physical Aspects in LES and Hybrid LES/RANS of Turbulent Flow Separation in a 3-D Diffuser. Int. J. Heat and Fluid Flow, Vol. 31(5), pp. 820–832
Jakirlić, S., Kadavelil, G., Sirbubalo, E., von Terzi, D., Breuer, M. and Borello, D. (2010b): 14th ERCOFTAC SIG15 Workshop on Turbulence Modelling: Turbulent Flow Separation in a 3-D Diffuser. "Sapienza" University of Rome, September 18, 2009, ERCOFTAC Bulletin, December Issue, No. 85, pp. 5–13
Jeyapaul, E. and Durbin, P. (2010): Turbulent separation in a three-dimensional diffuser. 8th Int. ERCOFTAC Symp. on Engineering Turbulence Modelling and Measurements (ETMM8), Marseille, France, June 9–11
John-Puthenveettil, G. (2012): Computational modelling of complex flows using eddy-resolving turbulence models accounting for the near-wall turbulence. PhD Thesis, Technische Universitaet Darmstadt
Maduta, R. and Jakirlić, S. (2011): An eddy-resolving Reynolds stress transport model for unsteady flow computations. 4th Symposium on Hybrid RANS-LES Methods, Beijing, China, September 28–30. In "Advances in Hybrid RANS-LES Modelling 4", 2012. Notes on Numerical Fluid Mechanics and Multidisciplinary Design, Springer ISBN 978-3-642-31817-7, Fu. S et al. (Eds.)
Mehdizadeh, O.Z, L. Temmerman, B. Tartinville and Ch. Hirsch (2012): Applications of EARSM Turbulence Models to Internal Flows. Paper No. GT2012-68886, Proceedings of ASME Turbo Expo 2012, June 11–15, 2012, Copenhagen, Denmark
Menter, F. and Egorov, Y. (2010): The Scale-adaptive Simulation method for unsteady turbulent flow predictions. Part 1: theory and model description. Flow, Turbulence and Combustion, Vol. 85, pp. 113–138
Nagano, Y., Tagawa, M. and Tsuji, T. (1993): Effects of Adverse Pressure Gradient on mean Flows and Turbulent Statistics in a Boundary Layer. Turbulent Shear Flows 8, Durst et al. (editors), p. 7, Springer Verlag
Obi, S., Aoki, K. and Masuda, S.: Experimental and computational study of turbulent separating flow in an asymmetric plane diffuser. Proc. 9th Symp. on Turbulent Shear Flows, Kyoto, Japan, August 16–19, pp. 305.1–305.5, 1993
Ohlsson, J., Schlatter, P., Fischer P.F. and Henningson, D.S. (2009): DNS of three-dimensional separation in turbulent diffuser flows. In Advances in Turbulence XII, Proceedings of the 12th EUROMECH European Turbulence Conference, Marburg. Springer Proceedings in Physics, Vol. 132, ISBN 978-3-642-03084-0
Ohlsson, J., Schlatter, P., Fischer P.F. and Henningson, D.S. (2010): DNS of separated flow in a three-dimensional diffuser by the spectral-element method. J. Fluid Mech., Vol. 650, pp. 307–318
Schneider, H., von Terzi D., Bauer, H.-J. and Rodi, W. (2010): Reliable and accurate prediction of three-dimensional separation in asymmetric diffusers using large-eddy simulation. ASME J. Fluids. Engineering, Vol. 132(3), p. 031101-1
Schneider, H., von Terzi D., Bauer, H.-J. and Rodi, W. (2011a): Impact of secondary vortices on separation dynamics in 3d asymmetric diffusers. In Proceedings of Direct and Large Eddy Simulation 8 (DLES8), 7–9 July 2010, Eindhoven, The Netherlands
Schneider, H., von Terzi D., Bauer, H.-J. and Rodi, W. (2011b): A mechanism for control of turbulent separated flow in rectangular diffusers. J. Fluid Mech., Vol. 687, pp. 584–594
Spalart, P.R., Jou, W.-H., Strelets, M. and Allmaras, S. (1997): Comments on the feasibility of LES for wings and on a hybrid RANS/LES approach, 1st AFOSR Int. Conf. on DNS and LES
Spalart, P.R. (2009): Detached‐Eddy Simulation. Annu. Rev. Fluid Mech., Vol. 41, pp. 181–202
Steiner, H., Jakirlić, S., Kadavelil, G., Šarić, S., Manceau, R. and Brenn. G. (2009): Report on 13^th ERCOFTAC Workshop on Refined Turbulence Modelling. September 25–26, 2008, Graz University of Technology, ERCOFTAC Bulletin, No. 79, pp. 24–29
Stock, H.W., Leicher, S. and Seibert, W. (1988): Investigation of flow separation in a 3d diffuser using a coupled Euler and boundary layer method. Zeitschrift fuer Flugwissenschaften und Weltraumforschung, Vol. 12(5–6), pp. 347–357
Xu, D., Leschziner, M.A., Khoo, B.C., Shu, C. (1997): Numerical prediction of separation and reattachment of turbulent flow in an axisymmetric diffuser. Computers and Fluids, Vol. 26(4), pp. 417–423