UFR 4-16 Evaluation: Difference between revisions

From KBwiki
Jump to navigation Jump to search
Line 20: Line 20:
contribution.  Before  starting  with  the  latter,  some  key  physical
contribution.  Before  starting  with  the  latter,  some  key  physical
characteristics illustrated appropriately are discussed as follows.
characteristics illustrated appropriately are discussed as follows.
===Physical issues/characteristics of the flow in a 3D diffuser===
Here an overview of the  most  important  flow  features  posing  a  special
challenge to the turbulence modeling is given. Their  correct  capturing  is
of decisive importance with respect to the quality of the final results.  In
order to illustrate these phenomena the experimental  and  DNS  results  are
used along with some results obtained  by  LES,  hybrid  LES/RANS  and  RANS
methods by the groups participating at the SIG15 workshop.





Revision as of 18:18, 1 August 2012

Flow in a 3D diffuser

Front Page

Description

Test Case Studies

Evaluation

Best Practice Advice

References

Confined flows

Underlying Flow Regime 4-16

Evaluation

Evaluation of the results

Both 3D diffuser configurations have served as test cases of the 13th and 14th ERCOFTAC SIG15 Workshops on refined turbulence modelling, Steiner et al. (2009) and Jakirlic et al. (2010b). In addition to different RANS models, the LES and LES-related methods (different seamless and zonal hybrid LES/RANS - HLR - models; DES - Detached Eddy Simulation) were comparatively assessed (visit www.ercoftac.org; under SIG15); the comparative analysis of selected results is presented in the section "Cross- Comparison of CFD calculations with experimental results" of the present contribution. Before starting with the latter, some key physical characteristics illustrated appropriately are discussed as follows.


Physical issues/characteristics of the flow in a 3D diffuser

Here an overview of the most important flow features posing a special challenge to the turbulence modeling is given. Their correct capturing is of decisive importance with respect to the quality of the final results. In order to illustrate these phenomena the experimental and DNS results are used along with some results obtained by LES, hybrid LES/RANS and RANS methods by the groups participating at the SIG15 workshop.





Contributed by: Suad Jakirlić, Gisa John-Puthenveettil — Technische Universität Darmstadt

Front Page

Description

Test Case Studies

Evaluation

Best Practice Advice

References


© copyright ERCOFTAC 2024