UFR 3-36 References

From KBwiki
Revision as of 09:33, 12 October 2022 by Erij.alaya (talk | contribs)
Jump to navigation Jump to search

Lib:Create_Ercoftac_Article_Form

Front Page

Description

Test Case Studies

Evaluation

Best Practice Advice

References


==

Underlying Flow Regime 3-36

References

  1. D. Greenblatt, K. B. Paschal, C.-. S. Yao, J. Harris, N. W. Schaeffler and A. E. Washburn Experimental Investigation of Separation Control Part 1: Baseline and Steady Suction. AIAA Journal, 44(12):2820–2830, 2006
  2. D. Greenblatt, K. B. Paschal, C.-. S. Yao and J. Harris Experimental Investigation of Separation Control Part 2: Zero Mass-Flux Oscillatory Blowing. AIAA Journal, 44(12):2831–2845, 2006
  3. S. Zhang and S. Zhong Turbulent Flow Separation over a Two-Dimensional Ramp Using Synthetic Jets. AIAA Journal, 49(12):2637–2649, 2011
  4. Y. Bentaleb, S. Lardeau and M. A. Leschziner Large-eddy simulation of turbulent boundary layer separation from a rounded step, Journal of Turbulence, 13(4):1–28, 2012
  5. C. L. Rumsey LES: 2-D curved backward-facing step, Available: https://turbmodels.larc.nasa.gov/Other_LES_Data/curvedstep.html. 2021
  6. K. J. Disotell and C. L. Rumsey Development of an Axisymmetric Afterbody Test Case for Turbulent Flow Separation Validation, NASA/TM-2017-219680, Langley Research Center, 2017
  7. K. J. Disotell and C. Rumsey Modern CFD Validation of Turbulent Flow Separation on Axisymmetric Afterbodies, NASA/Umich Symposium on Advances in Turbulence Modeling, 2017
  8. D. Schwamborn, T. Gerhold and R. Kessler The DLR TAU-Code: Recent Applications in Research and Industry, ECCOMAS CFD 2006 Conference, Netherlands, 2006
  9. S. R. Allmaras, F. T. Johnson and P. R. Spalart Modifications and Clarifications for the Implementation of the Spalart-Allmaras Turbulence Model, ICCFD7-1902, 7th International Conference on Computational Fluid Dynamics, Big Island, Hawaii, 2012
  10. M. L. Shur, M. K. Strelets, A. K. Travin and P. R. Spalart Turbulence Modeling in Rotating and Curved Channels: Assessing the Spalart-Shur Correction, AIAA Journal,38(5):784–792, 2000
  11. P. R. Spalart Strategies for Turbulence Modelling and Simulation, International Journal of Heat and Fluid Flow,21:252–263, 2000
  1. S. Jakirlić and R. Manceau and S. Šarić and A. Fadai-Ghotbi and B. Kniesner and S. Carpy and G. Kadavelil and C. Friess and C. Tropea and J. Boré}e LES, Zonal and Seamless Hybrid LES/RANS: Rationale and Application to Free and Wall-Bounded Flows Involving Separation and Swirl, Numerical Simulation of Turbulent Flows and Noise Generation, pages 253–282, 2009
  1. Lardeau, S. and Leschziner, MA The interaction of round synthetic jets with a turbulent boundary layer separating from a rounded ramp, Journal of Fluid Mechanics, 683:172–211, 2011
  1. Launder, BE and Sharma, BI Application of the energy-dissipation model of turbulence to the calculation of flow near a spinning disc, Letters Heat Mass Transfer, 1:131–137, 1974
  1. Lien, FS and Chen, WL and Leschziner, MA Low-Reynolds-number eddy-viscosity modelling based on non-linear stress-strain/vorticity relations, Engineering turbulence modelling and experiments 3, Elsevier, pages 91–100, 1996
  1. Lilly, DK A proposed modification of the Germano subgrid-scale closure method, Physics of Fluids A: Fluid Dynamics, 4:633, 1992
  1. Lund, T.S. and Wu, X. and Squires, K.D. Generation of turbulent inflow data for spatially-developing boundary layer simulations, Journal of Computational Physics, 140(2):233–258, 1998
  1. M. Marquillie and J. P. Laval and R. Dolganov Direct numerical simulation of a separated channel flow with a smooth profile Journal of Turbulence, 9(1):1–23, 2008
  1. Menter, F.R. Two-equation eddy-viscosity turbulence models for engineering applications AIAA journal, 32(8):1598–1605, 1994
  1. J. Neumann and H. Wengle Coherent structures in controlled separated flow over sharp-edged and rounded steps, Journal of Turbulence, 5(22):1–24, 2004
  1. S. Radhakrishnan and U. Piomelli and A. Keating Wall-modeled large-eddy simulations of flows with curvature and mild separation, Journal of Fluids Engineering, 130:101203, 2008
  1. S. Radhakrishnan and U. Piomelli and A. Keating and A. S. Lopes Reynolds-averaged and large-eddy simulations of turbulent non-equilibrium flows, Journal of Turbulence, 7(63):1–30, 2006
  1. Rhie, CM and Chow, WL Numerical study of the turbulent flow past an airfoil with trailing edge separation, AIAA journal, 21(11):1525–1532, 1983
  1. Rodi, W. Experience with two-layer models combining the k-epsilon model with a one-equation model near the wall, In 29th AIAA Aerospace Sciences Meeting, Volume 1, 1991
  1. Schlatter, P. and Örlü, R. Assessment of direct numerical simulation data of turbulent boundary layers, Journal of Fluid Mechanics, 659:116–126, 2010
  1. Shih, T.H. and Liou, W.W. and Shabbir, A. and Yang, Z. and Zhu, J. A new k-[epsilon] eddy viscosity model for high reynolds number turbulent flows, Computers & Fluids, 24(3):227–238, 1995
  1. S. Song and J. K. Eaton Reynolds number effects on a turbulent boundary layer with separation, reattachment, and recovery, Experiments in Fluids, 36(2):246–258, 2004
  1. C. Wang and Y. J. Jang and M. A. Leschziner Modelling two- and three-dimensional separation from curved surfaces with anisotropy-resolving turbulence closures, International Journal of Heat and Fluid Flow, 25:499–512, 2004
  1. B. Wasistho and K.D. Squires Prediction of turbulent separation over a backward-facing smooth ramp, Journal of Turbulence, 6:1–26, 2005
  1. Wilcox, D.C., American Institute of Aeronautics and Astronautics Turbulence modeling for CFD, volume 2 DCW industries La Canada, CA
  1. Zhang, S. and Zhong, S. An experimental investigation of turbulent flow separation control by an array of synthetic jets, AIAA Paper, 2010-4582, 2010




Contributed by: Erij Alaya and Cornelia Grabe — Deutsches Luft-und Raumfahrt Zentrum (DLR)

Front Page

Description

Test Case Studies

Evaluation

Best Practice Advice

References


© copyright ERCOFTAC 2024