UFR 3-34 Description
Underlying Flow Regime 3-34
The UFR in question is characterized by several complex flow phenomena. They include APG-induced separation of the turbulent boundary layer from a smooth surface, reattachment of the separated shear layer, and relaxation of the reattached turbulent boundary layer farther downstream. All these phenomena are known to be very difficult to predict with RANS models as well as with scale-resolving approaches to turbulence representation. The UFR is of significant industrial importance and is directly related to several Application Challenges included in the ERCOFTAC Knowledge Base Wiki, e.g., AC 1-05 (Ahmed body), AC 1-08 (L1T2 3 element airfoil), AC 4-01 (wind environment around an airport terminal building), and AC 4-03 (Air flows in an open plan air conditioned office). Hence it is of high interest for the ground transportation, aerospace, civil engineering, and other industries. The 2DWMH flow includes all the major flow features of the UFR listed above and, therefore, is a representative example of the considered UFR. This makes it an attractive test case (TC) for an objective evaluation of capabilities of existing modelling/simulation approaches and CFD techniques in terms of predicting the UFR in question. The purpose of this document is to provide a comprehensive summary of results of a systematic study of this TC with the use of enhanced hybrid RANS-LES methods undertaken in the framework of the EU Research Collaborative Project “Grey Area Mitigation for Hybrid RANS-LES Methods” (Go4Hybrid)  and a comparison with computations performed recently by Uzun and Malik  who computed the flow with the use of much more expensive Wall-Resolved LES (WRLES). This and, also, a brief overview of the results of RANS computations of this flow presented in detail on the NASA Turbulence Modeling Resource web site https://turbmodels.larc.nasa.gov/nasahump_val.html , give a clear idea on capabilities and restrictions of different turbulence modelling/simulation strategies with regard to the considered UFR. It should be noted also that an accurate prediction of the separation point in the 2DWMH flow is not that difficult thanks to a rather abrupt variation of the downstream part of the hump geometry and, therefore, sudden appearance of the APG. On the one hand, this somewhat decreases its value but, on the other hand, it allows to “isolate” the issues associated with prediction of separation and reattachment.
The document is organized as follows. In the next sub-section a brief review is presented of studies of this UFR and a rationale is given of the choice of the specific TC. Then, in the first and second parts of the Test Case section, an outline is performed of the experiments , . After that, in the CFD Codes and Methods subsection and in the Evaluation section, a summary of CFD methods used, results of the simulations performed, and comparison of the results with each other and with the experimental data are presented. First, an overview of the RANS studies of the TC is given, based on the database accumulated in . Then, a more detailed analysis is provided of the studies carried out in the course of the Go4Hybrid project ,  within non-zonal and zonal hybrid RANS-LES approaches and, also, in the recent work  where the flow is thoroughly investigated with the use of WRLES. Finally, in Best Practice Advice some practical advices on computing the considered UFR are given based on the performed analysis.
Brief Review of UFR Studies and Choice of Test Case
Considering both fundamental and industrial importance of the UFR in question, it is not
surprising that a variety of flows related to this UFR have been investigated in a huge number of
experimental and numerical studies. As mentioned in the introduction, this document focuses on
one of these flows, namely, on the 2DWMH TC , .
Despite a relatively simple (nominally
2D) geometry, this flow includes major challenging features of the considered UFR
(see previous section),
thus presenting a relevant test case for assessment of CFD capability of reliable
predicting these features. Other than that, the experiments have been specially designed for CFD
validation. As a result, the experimental database ensures the possibility of the formulation of a
corresponding computational problem which reasonably adequately represents the experimental
setup. Moreover, the data are well documented and are available in digital form at
web sites  and .
The last but not least rationale for the choice of exactly this TC is that it has been used in
the framework of several national and international initiatives directed at the evaluation of
different CFD techniques and turbulence modelling/simulation strategies. In particular, it has
been included by NASA in a set of test cases aimed at verification of the implementation and at
validation of a wide range of RANS turbulence models (NASA Turbulence Modeling Resource
and also thoroughly investigated in the framework of the recent EU Project
Go4Hybrid , 
with the use of enhanced hybrid RANS-LES methods and in the work of
Uzun and Malik ,
who performed WRLES of the 2DWMH flow on extremely large (up to 850
million points) grids and addressed different computational aspects of the simulations.
Contributed by: E. Guseva, M. Strelets — Peter the Great St. Petersburg Polytechnic University (SPbPU)
© copyright ERCOFTAC 2020