UFR 3-06 Description

From KBwiki
Revision as of 13:11, 6 March 2009 by David.Fowler (talk | contribs)
Jump to navigation Jump to search


Front Page

Description

Test Case Studies

Evaluation

Best Practice Advice

References




Natural and mixed convection boundary layers on
vertical heated walls (A)

Underlying Flow Regime 3-06               © copyright ERCOFTAC 2004


Description

Preface

Introduction

The flow under consideration is a low mach number flow of a strongly heated gas inside a vertical circular tube. The experimental work of A.M.Shehata and D.M.McEligot (3) which is used to define this UFR supplements and extends earlier data for internal flows in small tubes (D<13mm) with temperature dependent transport properties that could only provide integralparameters.

These recent data are used to assess turbulence models by comparing measures and computed distributions of the mean streamwise velocity and temperature in this well defined experiment involving strong influence on the initial turbulent field, of the variation of the gas transport properties and the thickening of the viscous layer (the so called laminarization effect) which are caused by intense heating at the wall. Intense heating is defined here by a ratio wall to bulk absolute temperatures greater than 2.5.

This UFR is of particular relevance for the design of gas cooled nuclear reactors and the use of a gas as a coolant in power generation systems.

Review of UFR studies and choice of test case

© copyright ERCOFTAC 2004



Contributors: André Latrobe - CEA / DRN / Department de Thermohydraulique


Front Page

Description

Test Case Studies

Evaluation

Best Practice Advice

References