UFR 2-10 Test Case: Difference between revisions
Jump to navigation
Jump to search
| Line 16: | Line 16: | ||
and the free-stream turbulence level was ''Tu'' ≈ 2%. | and the free-stream turbulence level was ''Tu'' ≈ 2%. | ||
[[Image:UFR2-10_figure_2.gif|centre|thumb|500px|Figure | |||
[[Image:UFR2-10_figure_2.gif|centre|thumb|500px|Figure 2. Experimental configuration for flow visualization and LDV measurements, from Palau-Salvador ''et al'' (2010)]] | |||
== Test Case Experiments == | == Test Case Experiments == | ||
Revision as of 10:23, 11 January 2011
Test Case
Brief Description of the Study Test Case
The case considered is the flow past a finite-height circular cylinder mounted on a flat plate for two height-to-diameter ratios h/D = 2.5 and 5.0. The parameters of the study and the dimensions of the cylinder are given in Table 1. The cylinder was placed in a water tunnel and the measurement section dimensions are provided in Fig. 2. The thickness of the approach- flow boundary layer was about 0.1 = h and the free-stream turbulence level was Tu ≈ 2%.
Test Case Experiments
CFD Methods
Contributed by: Guillermo Palau-Salvador, Wolfgang Rodi, — Universidad Politecnica de Valencia, Karlsruhe Institute of Technology
© copyright ERCOFTAC 2011