UFR 1-06 Test Case: Difference between revisions

From KBwiki
Jump to navigation Jump to search
No edit summary
Line 23: Line 23:


== CFD Methods ==
== CFD Methods ==
<math>\frac{\partial }{\partial x_{j}}\left(\overline{{\rho
}}U_{j}\varepsilon \right)=\frac{\partial }{\partial
x_{j}}\left[\left(\mu +\frac{\mu }{\sigma _{\varepsilon
}}\right)\frac{\partial \varepsilon }{\partial
x_{j}}\right]+c_{\varepsilon 1}\overline{{\rho }}S\frac{\varepsilon
}{k}-c_{\varepsilon 2}\overline{{\rho }}\frac{\varepsilon
^{2}}{k+\sqrt{\nu \varepsilon }}+S_{\varepsilon B}</math>


{{UFRHeader
{{UFRHeader

Revision as of 18:51, 24 January 2010

Front Page

Description

Test Case Studies

Evaluation

Best Practice Advice

References

Axisymmetric buoyant far-field plume in a quiescent unstratified environment

Underlying Flow Regime 1-06

Test Case

Brief Description of the Study Test Case

The experiments used in this UFR are those of George et al. [3] which were conducted in 1974 at the Factory Mutual Research Corporation and were subsequently repeated by Shabbir & George [33] at the University of Buffalo.

• Heated air is discharged through a circular orifice into ambient air that is at rest. • The plume source temperature is 300°C and the ambient air is 29°C. • The source has diameter, D = 6.35 cm. • The hot air is discharged at a velocity of U0 = 67 cm/s with a approximately a top-hat profile. • Temperature and velocity fluctuations at the inlet are less than 0.1%. • George et al. [3] present experimentally measured profiles of both mean and fluctuating components of the temperature and axial velocity in the self-similar region at x/D = 8, 12 and 16 above the source.

Test Case Experiments

CFD Methods


Front Page

Description

Test Case Studies

Evaluation

Best Practice Advice

References


Contributed by: Simon Gant — '

© copyright ERCOFTAC 2009