EXP 1-1 Measurement Quantities and Techniques: Difference between revisions

From KBwiki
Jump to navigation Jump to search
No edit summary
Line 89: Line 89:
Two different high-speed measurements were carried out. First, the visualisation of the spray trajectory was performed with the aim of recording the maximum possible area with sufficient pixel size for resolving important flow features. The second liquid sheet was visualised in detail to extract the sheet break-up length and surface wave structure.<br/>
Two different high-speed measurements were carried out. First, the visualisation of the spray trajectory was performed with the aim of recording the maximum possible area with sufficient pixel size for resolving important flow features. The second liquid sheet was visualised in detail to extract the sheet break-up length and surface wave structure.<br/>
The camera recorded for each measurement and flow regime a sequence of 4000 instantaneous images at a frame rate of 60,000 frames per second (fps) with an image resolution of 512 × 512 pixels (width × height) and at a shutter speed of 1 µs. The image area was 23.58 × 23.58 mm<math>^2</math> and 11.44 × 11.44 mm<math>^2</math> for the first and second measurement, respectively. The depth of field was approximately 6 and 13 mm respectively.<br/>
The camera recorded for each measurement and flow regime a sequence of 4000 instantaneous images at a frame rate of 60,000 frames per second (fps) with an image resolution of 512 × 512 pixels (width × height) and at a shutter speed of 1 µs. The image area was 23.58 × 23.58 mm<math>^2</math> and 11.44 × 11.44 mm<math>^2</math> for the first and second measurement, respectively. The depth of field was approximately 6 and 13 mm respectively.<br/>
The spatial resolution is hence in the first case 46 μm/px × 46 μm/px, allowing the detection of large liquid structures to determine the spray trajectory in cross-flow. In the second case, it is 22.3 μm/px × 22.3 µm/px for the precise extraction of the liquid sheet break-up position. The camera axis was aligned perpendicularly to the flow and the main atomiser axis with backlit illumination, see '''[[#figure11|Figure 11]]'''.<br/>
The spatial resolution is hence in the first case 46 μm/px × 46 μm/px, allowing the detection of large liquid structures to determine the spray trajectory in cross-flow. In the second case, it is 22.3 μm/px × 22.3 µm/px for the precise extraction of the liquid sheet break-up position. The camera axis was aligned perpendicularly to the flow and the main atomizer axis with backlit illumination, see '''[[#figure11|Figure 11]]'''.<br/>





Revision as of 07:18, 30 May 2023

Lib:Create_Ercoftac_Article_Form

Front Page

Introduction

Review of experimental studies

Description

Experimental Set Up

Measurement Quantities and Techniques

Data Quality and Accuracy

Measurement Data and Results

Measurement quantities and techniques

Measurement setup of PDA

The size and velocity of droplets in the spray were determined using a two-component fibre-based PDA measurement system (Dantec Dynamics A/S Skovlunde, Denmark). The arrangement of the measurement setup is shown in Figure 9.
A multiline Ar-Ion laser produced a horizontally polarised light beam with 0.35 W output power. The green (514.5 nm) and blue (488 nm) wavelength components were extracted and used to provide two-component velocity measurements (in the Y and Z-axis) in the coincidence mode simultaneously with droplet sizing. Both the beams were split into a pair of parallel beams with a separation of 38 mm which were consequently expanded by a 1.98× beam expander and symmetrically intersected using transmitting optics. The frequency of one beam from each pair was shifted by 40 MHz. The intersected beams formed an elongated ellipsoidal measurement volume with the axes length of 0.123 × 0.123 × 1.63 mm. The measurement volume length was truncated by a 0.1-mm wide spatial filter. The positioning of the receiving optics at 48° from the forward direction was used to collect the light scattered from droplets dominated by the first order of refraction and to minimise reflections from windows. Both transmitting and receiving optics used lenses with 500 mm focal lengths. The principle of phase Doppler anemometry, data processing, measurement precision and uncertainties and other features are explained in [1] .
Three planes in the spray were probed at axial positions Z = 10, 15 and 20 mm from the nozzle exit. For each plane, seven lines perpendicular to the flow direction and one line parallel with the flow direction in the atomiser axis were measured as seen in Figure 10. At each point, either 50,000 droplet samples were acquired or a 10-second acquisition duration was achieved. The Dantec BSA software 5.2 was used to control the measurement. The PDA configuration is described in Table 3. Each sample contains information on diameter and velocity components in the Y and Z-axis as detailed in the section Measurement data/results.


PDAsetup.png
Figure 9: PDA setup
Measurement scheme.png
Figure 10: Measurement scheme with the arrangement of the measurement points
Table 3 PDA Setup

Parameter

Value

Laser power output

0.35 W

Scattering angle

48°

Receiver mask

B

Receiver spatial filter

0.1 mm

The focal length of transmitting/receiving optics

500/500 mm

Wavelength

488 nm

514.5 nm

Velocity component

Axial

Radial

Velocity centre

19 m/s

0 m/s

Velocity span

51 m/s

73 m/s

Sensitivity

800 V

1050 V

SNR

0 dB

0 dB

Signal gain

8 dB

10 dB

Level validation ratio

8

2

High-speed visualisation

An HSC FASTCAM SA-Z type 2100K-M-16GB (Photron, Japan) was used to capture the instantaneous images of the spray under cross-flow. LED light model HPL3-36DD18B (Lightspeed Technologies, USA) provided spray illumination with a light pulse duration of 400 ns. The camera was equipped with a long-distance microscope 12 X Zoom lens (NAVITAR, New York, USA) composed of a 2X F -mount adapter (type 1 –62922), a 12 mm F.F zoom lens (type 1 –50486) together with 0.25 X lens (type 1 –50011).
Two different high-speed measurements were carried out. First, the visualisation of the spray trajectory was performed with the aim of recording the maximum possible area with sufficient pixel size for resolving important flow features. The second liquid sheet was visualised in detail to extract the sheet break-up length and surface wave structure.
The camera recorded for each measurement and flow regime a sequence of 4000 instantaneous images at a frame rate of 60,000 frames per second (fps) with an image resolution of 512 × 512 pixels (width × height) and at a shutter speed of 1 µs. The image area was 23.58 × 23.58 mm and 11.44 × 11.44 mm for the first and second measurement, respectively. The depth of field was approximately 6 and 13 mm respectively.
The spatial resolution is hence in the first case 46 μm/px × 46 μm/px, allowing the detection of large liquid structures to determine the spray trajectory in cross-flow. In the second case, it is 22.3 μm/px × 22.3 µm/px for the precise extraction of the liquid sheet break-up position. The camera axis was aligned perpendicularly to the flow and the main atomizer axis with backlit illumination, see Figure 11.


ConfigHSV.png
Figure 11: Configuration of the HSV experiment


SprayBound.png
Figure 12: Spray boundary for 0.5 MPa, 0 m/s

The image sequence in the dataset documents the stages of the liquid discharge, formation of the conical liquid film, its destabilisation, primary break-up into bag and ligament structures and the secondary break-up of the ligaments into droplets and the final spray. It gives qualitative information on these phenomena as well as allows for photogrammetric estimation of the liquid sheet geometry, sheet fluctuations, wavy structures and corrugations, and break-up position. Sizes of ligaments, liquid bags and large droplets can be estimated, and their deformation can be tracked. The morphology and shape of the spray can be acquired. Spray boundaries were derived from full sets of 4000 instantaneous images using a function in MATLAB®. Boundaries for the windward and leeward sides were evaluated separately for each image. The average spray trajectory (green line) was derived afterwards and also the standard mean deviation was determined (red dashed line) as illustrated in Figure 12.

Boundary conditions

The geometrical domain, which provides boundary conditions for CFD calculations of the spray-gas interaction is represented by the test section, including the atomiser. If also the water flow inside the atomiser is of interest then the internal atomiser cavity must be simulated apart from the space outside the atomiser.
The first domain contains the test section (7) with the tip of the atomiser (17) facing the section. Their dimensions, positioning and other features are described in the section Experimental Setup, subsection Wind Tunnel Facility. The inlet of the test section (7) is connected to the laminarisation piece - channel (6). The test section outlet is connected to the exit diffuser (8). The pressure difference between the tunnel inlet and the test section is less than 200 Pa for the maximum set velocity of 32 m/s. So that the total pressure can be considered equal to the ambient air pressure. The working fluids are water and air with their properties described in the section Experimental Setup, subsection "Atomizer under test and its supply system. The water was sprayed into the air which flew via the test section. It produced a two-phase gas-liquid mixture where the liquid was dispersed in the gas phase.
The second domain, which is represented by the internal cavity in the atomiser (17) is documented in Figure 7. A flat velocity profile with zero is usually prescribed at the inlet of the swirling ports [2]. The velocity results from the flow rate given in Table 2. The numerical setup used for such flows and geometrical models is studied in [3].
The tunnel was designed to produce a flat and low-turbulent air velocity profile at the test section inlet. The velocity profile in the measured position (Figure 13) is flat with values of ±5% from the nominally set value (8, 16 or 32 m/s) within the positions ±80 mm from the section axis and the velocity continuously decreases towards the walls. The profiles were measured without the atomiser spraying, which strongly affects the local velocity around the spray and behind it. These effects must be considered in the numerical studies.

References

  1. F. Lizal, J. Jedelsky, K. Morgan, K. Bauer, J. Llop, U. Cossio, S. Kassinos, S. Verbanck, J. Ruiz-Cabello, A. Santos, E. Koch, and C. Schnabel, European Journal of Pharmaceutical Sciences 113, 95 (2018)
  2. G. Amini, International Journal of Multiphase Flow 79, 225 (2016)
  3. M. Maly, J. Slama, O. Cejpek, and J. Jedelsky, in Applied Sciences (2022), Vol. 12


Contributed by: Ondrej Cejpek, Milan Maly, Ondrej Hajek, Jan Jedelsky — Brno University of Technology

Front Page

Introduction

Review of experimental studies

Description

Experimental Set Up

Measurement Quantities and Techniques

Data Quality and Accuracy

Measurement Data and Results


© copyright ERCOFTAC 2024