EXP 1-1 Description

From KBwiki
Revision as of 09:33, 24 March 2023 by Jan.Jedelsky (talk | contribs) (New article page for EXP_1-1_Description)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Lib:Create_Ercoftac_Article_Form

Front Page

Introduction

Review of experimental studies

Description

Experimental Set Up

Measurement Quantities and Techniques

Data Quality and Accuracy

Measurement Data and Results

Description of Study Test Case

This section should:

  • Convey the general set-up of the test case configuration (e.g. airflow over a bump on the floor of a wind tunnel)
  • Describe the geometry, illustrated by a sketch
  • Specify the flow parameters which define the flow regime (e.g. Reynolds number, Rayleigh number, angle of incidence etc.)
  • give the principal quantities of interest that were measured - these should include global parameters but also mean-flow and turbulence parameters.


The description can be kept fairly short if reference can be made to a publication or a link to a data base where details are given. For other cases a more detailed, self-contained description should be provided.



Contributed by: Ondrej Cejpek, Milan Maly, Jan Jedelsky — Brno University of Technology

Front Page

Introduction

Review of experimental studies

Description

Experimental Set Up

Measurement Quantities and Techniques

Data Quality and Accuracy

Measurement Data and Results


© copyright ERCOFTAC 2024