EXP 1-1 Description: Difference between revisions

From KBwiki
Jump to navigation Jump to search
No edit summary
 
(47 intermediate revisions by 3 users not shown)
Line 1: Line 1:


=Lib:Create_Ercoftac_Article_Form=
=Pressure-swirl spray in a low-turbulence cross-flow=
{{EXPHeaderLib
 
{{EXPHeader
|area=1
|area=1
|number=1
|number=1
Line 7: Line 8:
__NOTOC__
__NOTOC__
= Description of Study Test Case =
= Description of Study Test Case =
The conical liquid sheet produced by water spraying in PSA was investigated in cross-flow of non-heated, non-pressurised air. The atomiser was operated continuously in cold-flow (non-reacting) conditions. It generated a water spray at inlet pressure, <math>p_{in}</math>, of 0.5 MPa. The flow conditions of the atomiser are described by Reynolds number: <br/>
The conical liquid sheet produced by water spraying from a PSA was investigated in cross-flow of non-heated, non-pressurised air. See '''[https://kbwiki.ercoftac.org/w/index.php/EXP_1-1#figure1 Figure 1b]''', which shows the atomizer in the test section. The atomizer was operated continuously in cold-flow (non-reacting) conditions. It generated a water spray at inlet pressure, <math>p_{\text {in}}</math>, of 0.5 MPa. The flow conditions of the atomizer are described by Reynolds number: <br/> <br/>
<math>
<div id="eqn14">
R e_{i n}=\rho_l u_{i n} D_{i n} / \mu
{{NumBlk|:|<math>
</math>
R e_{\text {in}}=\rho_{\text {in}} u_{\text {in}} D_{\text {in}} / \mu
</math>|{{EquationRef|14}}}}
</div>
<br/>
<br/>
where <math>\rho_l</math> is the liquid density, <math>u_{in}</math> is the liquid velocity at inlet ports and <math>D_{\text {in}} </math> MPa is the hydraulic diameter of the inlet ports. The <math>R e_{i n}=1330</math>. The presented case is one of three inlet pressure cases <math>\left(p_{\text {in }}=0.25,0.5,1 MPa \mathrm {} \right) </math> MPa) measured and studied in <ref name="Cejpek2"> O. Cejpek, M. Maly, J. Slama, M. M. Avulapati, and J. Jedelsky, Continuum Mechanics and Thermodynamics 34 (6), 1497 (2022) </ref>.
where <math>\rho_l</math> is the liquid density, <math>u_{\text {in}}=Q_{\text {l}}/A_{\text {in}}</math> is the liquid velocity at inlet ports and <math>D_{\text {in}}=\sqrt{4A_{\text {in}}/\pi}</math> is the hydraulic diameter of the inlet ports (for atomizer details see '''[https://kbwiki.ercoftac.org/w/index.php/EXP_1-1_Experimental_Set_Up#figure7 Figure 7]''' and corresponding text in section ''[[EXP_1-1__Experimental_Set_Up|Experimental Set Up]]''). The <math>R e_{\text {in}}=1330</math>. The presented case is one of three inlet pressure cases (<math>p_{\text {in }}= \mathrm 0.25, 0.5, 1 </math> <math> \mathrm {MPa} </math>) measured and studied in <ref name="Cejpek2"> O. Cejpek, M. Maly, J. Slama, M. M. Avulapati, and J. Jedelsky, Continuum Mechanics and Thermodynamics 34 (6), 1497 (2022) </ref>.
The interaction of the spray with the cross-flowing air is controlled by the ratio of the momentum of liquid to the air momentum (see '''Equation (10)''') and by the Weber number which relies on the surface tension forces of the liquid film with the drag forces of the airflow ('''Equations (11) and (12)'''). <math>We</math> and <math>q</math> values for the experimental regimes are outlined in '''Table 2'''.
The interaction of the spray with the cross-flowing air is controlled by the ratio of the momentum of liquid to the air momentum, <math>q</math> (see '''[https://kbwiki.ercoftac.org/w/index.php/EXP_1-1_Introduction#math_10 Equation 10]''') and by the Weber number which relies on the surface tension forces of the liquid film with the drag forces of the airflow, <math>We_a</math> ('''[https://kbwiki.ercoftac.org/w/index.php/EXP_1-1_Introduction#math_11 Equation 11]''') or <math>We_r</math> ('''[https://kbwiki.ercoftac.org/w/index.php/EXP_1-1_Introduction#math_12 Equation 12]'''). <math>We</math> and <math>q</math> values for the experimental regimes are given in '''[[#table2|Table 2]]'''.


<br/>
<br/>
 
<div id="table2">
{| class="wikitable" style="text-align:center;margin:auto"
{| class="wikitable" style="text-align:center;margin:auto"
|- style="font-weight:bold; background-color:#c0c0c0;"
|- style="font-weight:bold; background-color:#c0c0c0;"
|+ '''Table 2''' Experimental regimes,  basic characteristics of the flow and spray
|+ '''Table 2''' Experimental regimes,  basic characteristics of the flow and spray
! <br /><math>v</math> [m/s]
! <br /><math>u_{cf}</math> [m/s]
! <br /><math>P_{in}</math> [MPa]
! <br /><math>p_{in}</math> [MPa]
! <br /><math>Q_{l}</math> [kg/hour]
! <br /><math>Q_{l}</math> [L/hour]
! <br /><math>C_{D}</math> [–]
! <br /><math>C_{D}</math> [–]
! <br /><math>We</math>  [–]
! <br /><math>We_{a}</math>  [–]
! <br /><math>We_{r}</math> [–]
! <br /><math>We_{r}</math> [–]
! <br /><math>q</math>  [–]
! <br /><math>q</math>  [–]
Line 61: Line 64:
|-  
|-  
|}
|}
 
</div>
== References ==
== References ==
<references/>
<references/>
Line 70: Line 73:
|organisation=Brno University of Technology
|organisation=Brno University of Technology
}}
}}
{{EXPHeaderLib
{{EXPHeader
|area=1
|area=1
|number=1
|number=1

Latest revision as of 08:22, 17 August 2023

Pressure-swirl spray in a low-turbulence cross-flow

Front Page

Introduction

Review of experimental studies

Description

Experimental Set Up

Measurement Quantities and Techniques

Data Quality and Accuracy

Measurement Data and Results

Description of Study Test Case

The conical liquid sheet produced by water spraying from a PSA was investigated in cross-flow of non-heated, non-pressurised air. See Figure 1b, which shows the atomizer in the test section. The atomizer was operated continuously in cold-flow (non-reacting) conditions. It generated a water spray at inlet pressure, , of 0.5 MPa. The flow conditions of the atomizer are described by Reynolds number:

 

 

 

 

(14)


where is the liquid density, is the liquid velocity at inlet ports and is the hydraulic diameter of the inlet ports (for atomizer details see Figure 7 and corresponding text in section Experimental Set Up). The . The presented case is one of three inlet pressure cases ( ) measured and studied in [1]. The interaction of the spray with the cross-flowing air is controlled by the ratio of the momentum of liquid to the air momentum, (see Equation 10) and by the Weber number which relies on the surface tension forces of the liquid film with the drag forces of the airflow, (Equation 11) or (Equation 12). and values for the experimental regimes are given in Table 2.


Table 2 Experimental regimes, basic characteristics of the flow and spray

[m/s]

[MPa]

[L/hour]

[–]

[–]

[–]

[–]

0

0.508

6.71

0.44

0.0

0.5


8

0.498

6.72

0.43

0.5

0.85

3642.0

16

0.491

6.68

0.42

1.8

1.5

938.8

32

0.493

6.69

0.43

7.1

3.4

227.1

References

  1. O. Cejpek, M. Maly, J. Slama, M. M. Avulapati, and J. Jedelsky, Continuum Mechanics and Thermodynamics 34 (6), 1497 (2022)


Contributed by: Ondrej Cejpek, Milan Maly, Ondrej Hajek, Jan Jedelsky — Brno University of Technology

Front Page

Introduction

Review of experimental studies

Description

Experimental Set Up

Measurement Quantities and Techniques

Data Quality and Accuracy

Measurement Data and Results


© copyright ERCOFTAC 2024