DNS 1-2 Description: Difference between revisions

From KBwiki
Jump to navigation Jump to search
Line 6: Line 6:
__TOC__
__TOC__
= Introduction =
= Introduction =
Turbulent Channel Flow, <math>Re_\tau=180</math> (8x4)Pi
The turbulent Channel Flow is one of the canonical flows used to study turbulence in wall bounded turbulence. DNS of turbulent channel flow were undertaken at <math>Re_\tau=180</math>.
DNS were undertaken using PyFR (http://www.pyfr.org/) version 1.12.0:
DNS were undertaken using PyFR (http://www.pyfr.org/) version 1.12.0:
<ul>
<ul>

Revision as of 06:07, 6 October 2021


Front Page

Description

Computational Details

Quantification of Resolution

Statistical Data

Instantaneous Data

Storage Format

Introduction

The turbulent Channel Flow is one of the canonical flows used to study turbulence in wall bounded turbulence. DNS of turbulent channel flow were undertaken at . DNS were undertaken using PyFR (http://www.pyfr.org/) version 1.12.0:

  • based on the high-order flux reconstruction method of Huynh
  • compressible solver
  • a Rusanov Riemann solver was employed to calculate the inter-element fluxes
  • an explicit RK45[2R+] scheme was used to advance the solution in time
  • Fifth order polynomials are used for the computations

Review of previous studies

Provide a brief review of related past studies, either experimental or computational. Identify the configuration chosen for the present study and position it with respect to previous studies. If the test case is geared on a certain experiment, explain what simplifications ( e.g. concern- ing geometry, boundary conditions) have been introduced with respect to the experiment in the computational setup to make the computations feasible and avoid uncertainty or ambiguity.

Description of the test case

A detailed self-contained description should be provided. It can be kept fairly short if a link can be made to an external data base where details are given. Then only the differences should be clearly indicated.

Geometry and flow parameters

Channel flow

The geometry is a cuboid of dimensions 8π units in the streamwise direction (x), 2 units in the transverse direction (y) and 4π units in the spanwise direction (z). The dimensions are normalised by the channel half-width, h and centreline velocity. The Taylor Reynolds number is 180.

Boundary conditions

Channel flow

The domain is periodic in the streamwise and spanwise directions which gives a flow developing in time. The transverse boundaries are viscous walls with no-slip boundary conditions. The initial density and pressure fields are uniform. The initial velocity field is (u,v,w)=(1-y2/h2). The solution is started at order 2 and progressively increased to order 5.



Contributed by: Arun Soman Pillai, Lionel Agostini — Imperial College London

Front Page

Description

Computational Details

Quantification of Resolution

Statistical Data

Instantaneous Data

Storage Format


© copyright ERCOFTAC 2024