Best Practice Advice AC2-09: Difference between revisions

From KBwiki
Jump to navigation Jump to search
Line 37: Line 37:
The computational domain for Sandia D Flame should extend  far  enough
The computational domain for Sandia D Flame should extend  far  enough
from the nozzle outlet to  capture  at  least  the  region  of  maximum
from the nozzle outlet to  capture  at  least  the  region  of  maximum
temperature, i.e. ''x/D'' ≥ 50. The numerical tests performed have  shown  that
temperature, i.e. ''x/D'' ≥ 50. The numerical tests performed have  shown  that
in order to limit the CPU time the  computational  domain  can  be  made
in order to limit the CPU time the  computational  domain  can  be  made
divergent in the downstream direction, and the lateral  extent  used  in
divergent in the downstream direction, and the lateral  extent  used  in

Revision as of 09:41, 30 April 2011


Front Page

Description

Test Data

CFD Simulations

Evaluation

Best Practice Advice

SANDIA Flame D

Application Challenge AC2-09   © copyright ERCOFTAC 2024

Best Practice Advice

Key Fluid Physics

The non-premixed Sandia D flame is an example of a flame in the flamelet regime in which the Kolmogorov scale is significantly larger than the scales characteristic for the combustion process. In this not demanding test case the models based on flamelet assumption should lead to good agreement with experimental data as was shown in the Evaluation section, especially in the region of developed flame. However, more discrepancies were observed in the near field were only mixing of fuel and oxidizer is considered.

Application Uncertainties

The flow field in the near field is certainly influenced by inlet conditions. The mean velocity profile and fluctuating component were chosen according to the experimental data. However, in the unsteady LES calculations the fluctuations were simulated by white noise. This means that the fluctuations characteristic for developed turbulent flow were not reproduced at the inlet and this could influence the mixing features in the near field. It is well known that white noise provides a fluctuating signal with a very short time scale which is then smoothed at a short distance from the inlet plane. However, it seems that due to very low inlet turbulence level the further results in the flame region are only weakly influenced by these near field results as both models analyzed led to reasonable results.

Computational Domain and Boundary Conditions

The computational domain for Sandia D Flame should extend far enough from the nozzle outlet to capture at least the region of maximum temperature, i.e. x/D ≥ 50. The numerical tests performed have shown that in order to limit the CPU time the computational domain can be made divergent in the downstream direction, and the lateral extent used in the current calculations (5.5D and 18.3D at the inlet and outlet plane respectively), is sufficient not to influence the flame structure by the lateral boundary conditions. The coflow as in experimental conditions should be introduced at the inlet and at the lateral boundaries.

Discretisation and Grid Resolution

Physical Modelling

Recommendations for Future Work




Contributed by: Andrzej Boguslawski — Technical University of Częstochowa

Front Page

Description

Test Data

CFD Simulations

Evaluation

Best Practice Advice


© copyright ERCOFTAC 2024