Jump to navigation Jump to search
No edit summary
No edit summary
Line 13: Line 13:
----
----
{{ACContribs
{{ACContribs
|authors=T. van Hooff
|authors=T. van Hooff(*)
|organisation=Dept. of Civil Engineering, KU Leuven and Dept. of the Built Environment, Eindhoven University of Technology
|organisation=(*)Dept. of Civil Engineering, KU Leuven and Dept. of the Built Environment, Eindhoven University of Technology
}}
}}
{{UFRHeader
{{UFRHeader

Revision as of 11:23, 19 February 2018

Mixing ventilation flow in an enclosure driven by a transitional wall jet

Front Page

Description

Test Case Studies

Evaluation

Best Practice Advice

References

Confined Flows

Underlying Flow Regime 4-20

Abstract

Ventilation flows are of large importance with respect to human health, comfort and energy use in buildings and other enclosures. A correct understanding of the complex airflow associated with ventilation flows is a necessity to advance ventilation systems and to increase health and comfort and decrease energy use. Experiments and numerical simulations using computational fluid dynamics (CFD) are two important methods to obtain detailed information on these complex flow problems. This UFR presents reduced-scale particle image velocimetry measurements and steady RANS CFD simulations of mixing ventilation flow in a cubical generic enclosure driven by a low Reynolds number (transitional) wall jet. The results obtained with three RANS turbulence models are compared with the PIV measurement results in the vertical center plane parallel to the supply flow direction. This UFR is of special relevance to UFR 4-11, and indirectly to AC 4-03.



Contributed by: T. van Hooff(*) — (*)Dept. of Civil Engineering, KU Leuven and Dept. of the Built Environment, Eindhoven University of Technology

Front Page

Description

Test Case Studies

Evaluation

Best Practice Advice

References


© copyright ERCOFTAC 2024