2D flow over backward facing step

Underlying Flow Regime 3-15 © copyright ERCOFTAC 2004

References

Alkselvol K. and Moin P. (1993), “Large eddy simulation of a backward facing step flow”, Engineering turbulence modelling and experiments 2, W. Rodi and F. Martelli (Eds.).

Apsley D. D. and Leschziner M. A. (1998), “A new low-Reynolds number non-linear two-equation turbulence model for complex flows”, Int. J. Heat Fluid Flow, 19, pp. 209

Armaly B. F., Durst F., Pereira J. C. F. and Schonung B. (1983), “Experimental and theoretical investigation of backward-facing step flow”, J. Fluid Mech., Vol. 127, pp. 473.

Chan D. C. and Mittal R. (1996), “Large eddy simulation of a backward facing step flow using a leastsquares spectral element method”, Proceedings of the summer program 96, Centre for turbulent research.

Cruz D. O. A. and Silva Freire A. P. (2002), “Note on a thermal law of the wall for separating and recirculating flows”, Int. J. Heat Mass Transfer, Vol. 45, pp. 1459.

Driver D. M., and Seegmiller H. L. (1985), “Features of reattaching turbulent shear layer in divergent channel flow”, AIAA J., Vol. 23, pp. 163.

Durst F. and Schmitt F. (1985), “Experimental studies of high Reynolds number backward-facing step flows”, Proc. 5th Symp. on Turbulent Shear Flows, Cornell University, Vol. 5, pp. 19.

Durbin P. A. (1995), “Separated flow computations with the k-e-v2 model”, AIAA journal Vol 33, 4, pp 659.

Germano M., Piomelli U., Moin P. and Cabot W. (1991), “A dynamic subgrid-scale eddy viscosity model” Phys. Fluids A. 3, pp. 1760

Grotjans H. and Menter F. R. (1998), “Wall functions for general application CFD codes”, European Congress on Computational Methods in Applied Sciences and Engineering, ECCOMAS 1998, Barcelona.

Hanjalic K. and Jakirlic S. (1998), “Contribution towards the second moment closure modelling of separating turbulent flows”, Computers and fluids, Vol. 27, pp. 137.

Jovic, S. and Driver, D. (1995), “Reynolds Number Effect on the Skin Friction in Separated Flows Behind a Backward-Facing Step”, Experiments in Fluids, Vol. 18, pp 464.

Kasagi N. and Matsunaga A. (1995), “Three-dimensional particle tracking velocimetry measurements of turbulence statistics and energy budget in a backward facing step flow”, Int. J. Heat and Fluid Flow, Vol. 16, pp. 477485.

Kim J. (1978), “Investigation of separation and reattachment of a turbulent shear layer: flow over a backward-facing step”, Ph.D. Thesis, Stanford University.

Kim J., Kline S. J. and Johnston J. P. (1980), “Investigation of a reattaching turbulent shear layer, flow over a backward-facing step”, J. Fluids Eng., 1980, 102, 302.

Le H., Moin P. and Kim J. (1997), “Direct numerical simulation of turbulent flow over a backward-facing step”, J. Fluid Mech., Vol. 330, pp. 349.

Lekakis I., Durst F. and Sender J. (1994), “LDA measurements in the near-wall region of an axisymmetric sudden expansion”, Proc. 7th Int. Symp. on Applications of Laser Techniques to Fluid Mechanics, Lisboa, Portugal.

Lilly, D. K. (1992), “A proposed modification of the Germano subgrid-scale model for compressible turbulence and scalar transport”, Phys. Fluids A 4, pp. 633.

Manceau R. and Parneix S. (1999), Computations of turbulent flows using the V2F model in a finite element code, Engineering turbulence modelling and experiments 4, W. Rodi and D. Laurence (Eds.).

Menter F. R. (1994), Two-equation eddy-viscosity turbulence models for engineering applications, AIAA journal Vol 32, 8, pp. 1588.

Menter F. R. (1996), On the connection between one- and two- equation models of turbulence, Engineering turbulence modelling and experiments 3, W. Rodi and G. Bergeles (Eds.).

Michelassi V., Durbin P. A. and Mansour N. N. (1996), Prediction of the backflow and recovery regions in the backward facing step at various Reynolds numbers, Proceedings of the summer program 96, Center for turbulent research.

Parneix S. and Durbin P. (1996), A new methodology for turbulence modellers using DNS database analysis, Annual research briefs, Center for turbulent research.

Parneix S., Laurence D. and Durbin P. (1996), Second moment closure analysis of the backstep flow database, Proceedings of the summer program 96, Center for turbulent research.

Perot B. and Moin P. (1996), A new approach to turbulence modelling, Proceedings of the summer program 96, Center for turbulent research.

Poroseva S. and Iaccarino G. (2001), Simulating separated flows using the k-ε model, Annual research briefs, Center for turbulent research.

Rodi W. (1991), Experience with two layer models combining the k-ε model with a one-equation model near the wall, AIAA Paper 91-0216.

Rodi W. and Mansour N. N. (1993), Low Reynolds number k-ε modelling with the aid of direct numerical simulation data, J. Fluid Mechanics, 250, pp. 509

Ross J. A. and Larock B. E. (1997), An algebraic stress finite element model for turbulent flow, Int. J. Num. Meth. Fluids, Vol. 24, pp. 693.

Spalart P. R. (1988), Direct simulation of a turbulent boundary layer up to R=1410, J. Fluid Mech., Vol. 187, pp. 61.

Vogel J. C. and Eaton J. K. (1985), Combined Heat Transfer and Fluid Dynamic Measurements Downstream of a Backward-Facing Step, Journal of Heat Transfer, Vol. 107, pp. 922.

Yap C. (1987), Turbulent heat and momentum transfer in recirculating and impinging flows, PhD. Thesis, Faculty of Technology, University of Manchester, 1987.

Yoder D. A. and Georgiadis N. J. (1999), Implementation and Validation of the Chien k-epsilon Turbulence Model in the WIND Navier-Stokes Code AIAA Paper 99-0745

Contributors: Arnau Duran - CIMNE